cystech electronics corp. spec. no. : c188ld issued date : 2013.03.05 revised date : page no. : 1/3 SB5200 cystek product specification 5.0amp schottky barrier rectifiers reverse voltage 200v forward current 5a SB5200 features outline ? guard ring for over voltage protection. do-201ad ? plastic package has ul flammability classification 94v-0 ? low power loss, high efficiency ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications mechanical data ? case : jedec do-201ad molded plastic body ? epoxy : ul94v-0 rate flame retardant ? terminals: plated axial leads, solderable per mil-std-750 method 2026. high temperature soldering guaranteed: 250 c/10seconds, 0.375?(9.5mm) lead length, 5lbs(2.3kg) tension ? polarity: color band denotes cathode end. ? mounting position : any. ? weight: 0.041 oz., 1.15 gram maximum ratings and electrical characteristics ( rating at 25 c ambient temperature unless otherwise specified. single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%) type parameter symbol SB5200 units maximum repetitive peak reverse voltage v rrm 200 v maximum rms voltage v rms 140 v maximum dc blocking voltage v dc 200 v maximum instantaneous forward voltage at 5a 1 v f 0.92 v maximum average forward rectified current @ 0.375?(9.5mm) lead length (see fig 1) i f(av) 5 a peak forward surge current @8.3ms single half sine wave superimposed on rated load (jedec method) at rated t l i fsm 125 a t a =25c 0.1 maximum dc reverse current at rated dc blocking voltage 1 t a =100c i r 5 ma typical thermal resistance 2 r jl 10 /w operating junction temperature range t j -55 ~ +175 storage temperature range t stg -55 ~ +175 note: 1.pulse test: pulse width 300 s, duty cycle 1% 2.thermal resistance, junction to lead , vertical pcb mounted, 0.375?(9.5mm) lead length
cystech electronics corp. spec. no. : c188ld issued date : 2013.03.05 revised date : page no. : 2/3 SB5200 cystek product specification characteristic curves
cystech electronics corp. spec. no. : c188ld issued date : 2013.03.05 revised date : page no. : 3/3 SB5200 cystek product specification do-201ad dimension do-201ad molded plastic package cystek package code: ld inches millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a ? 0.048 ? 0.052 ? 1.20 ? 1.30 d 1.000 - 25.40 - b 1.000 - 25.40 - e ? 0.190 ? 0.210 ? 4.80 ? 5.30 c 0.285 0.375 7.20 9.50 notes : 1.controlling dimension : millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material : ? lead : axial leads, solderable per mil-std-750, method 2026 guaranteed. ? mold compound : epoxy resin family, flammability solid burning class: ul94v-0 important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|
